Protocol-Specific Data - Endress+Hauser Levelflex FMP51 Technical Information

Levelflex FMP51, FMP52, FMP54

Protocol-specific data

Endress+Hauser
HART
Manufacturer ID
Device type ID
HART specification
Device description files (DTM,
DD)
HART load
HART device variables
Supported functions
1) only if an interface measurement is active
Wireless HART data
Minimum start-up voltage 11.4 V
Start-up current
Start-up time
Minimum operating
voltage
Multidrop current
Set-up time
17 (0x11)
0x34
6.0
Information and files at:
• www.endress.com
• www.hartcomm.org
Min. 250 Ω
The measured values can be freely assigned to the device variables.
Measured values for PV (primary variable)
• Level linearized
• Distance
1)
• Interface
1)
• Interface distance
• Upper interface thickness
• Electronic temperature
• Relative echo amplitude
• Relative interface amplitude
Measured values for SV, TV, FV (second, third and fourth variable)
• Level linearized
• Distance
1)
• Interface linearized
1)
• Interface distance
• Upper interface thickness
• Terminal voltage
• Electronic temperature
• Absolute echo amplitude
• Relative echo amplitude
• Absolute interface amplitude
• Relative interface amplitude
• Calculated DC
• Burst mode
• Additional transmitter status
3.6 mA
15 s
11.4 V
3.6 mA
1 s
1)
1)
1)
1)
1)
17