Endress+Hauser Levelflex FMP51 Technical Information page 52

52
Rod extension/centering HMP40 for FMP54
For FMP54 with rope probes the rod extension/centering HMP 40 is available as an accessory
→  117. It has to be used if otherwise the probe rope comes into contact with the lower edge of
the nozzle.
For FMP54 with rope probes the rod extension/centering HMP 40 is available as an accessory. It has
to be used if otherwise the probe rope comes into contact with the lower edge of the nozzle.
This accessory consists of the extension rod corresponding to the nozzle height, on which a
centering disk is also mounted if the nozzles are narrow or when working in bulk solids. This
component is delivered separately from the device. Please order the probe length
correspondingly shorter.
Centering disks with small diameters (DN40 and DN50) may only be used if there is no
significant build-up in the nozzle above the disk. The nozzle must not become clogged by the
product.
Levelflex FMP51, FMP52, FMP54
Endress+Hauser