Customized Parametrization - Endress+Hauser Levelflex FMP51 Technical Information

Customized parametrization

114
If the option IJ "Customized parametrization HART", IK "Customized parametrization PA" or IL
"Customized parametrization FF" has been selected in feature 570 "Service", customer specific
presettings can be selected for the following parameters:
Parameter
Setup → Distance unit
Setup → Empty calibration
Setup → Full calibration
Setup → Adv. Setup → Current output 1/2 → Damping
Setup → Adv. Setup → Current output 1/2 → Failure mode HART
Setup → Adv. Setup → Current output 1/2 → Burst mode
Levelflex FMP51, FMP52, FMP54
Communication Selection list / range of
values
• HART • in
• PA • mm
• FF
• HART 0 to 45 m (0 to 147 ft)
• PA
• FF
• HART 0 to 45 m (0 to 147 ft)
• PA
• FF
HART 0 to 999.9 s
• Min
• Max
• Last valid value
HART • Off
• On
Endress+Hauser