Furuno BR-500 Operator's Manual page 38

4. INSTALLATION
4. Fasten the cable to the Clamp with a cable tie (local supply). As shown in the fig-
ure below, make the distance between the terminal and the cable tie 100 mm.
5. Fasten the Mount Base to the mounting location with four self-tapping screws
(supplied). Fasten the Chassis to the Mount Case with four binding screws (sup-
plied).
Self-tapping screws
6. Seal the bottom entry with the blind sheet supplied.
4-6
15±5mm
Binding screws
Mount case
Blind sheet