Bulkhead Mount (Option) - Furuno BR-500 Operator's Manual

4.5.2

Bulkhead mount (option)

This mounting method requires the optional bulkhead mount kit (Type: OP24-20,
Code No. 001-118-740-00), the contents of which are shown in the table below. The
cable can be led into the unit from the bottom or rear of the unit.
Name
Mount Case
Mount Base
Clamp
Self-tapping Screw
Binding Screw
Lead in the cable from the rear of the unit
1. Prepare a cutout in the mounting location, referring to the outline drawing.
2. Pass the cable through the cutout and the Mount Case and connect it to the ter-
minal on the Chassis.
3. Remove the Clamp from the bottom of the Mount Base. Remove the cable protec-
tor from the clamp and attach it to the supplied clamp. Attach the supplied Clamp
to the rear cover with the same screws. (You may discard the clamp originally at-
tached to the Mount Base.)
Type
24-012-3101-0 100-362-890-10
24-012-3102-1 100-362-901-10
24-012-3103-0 100-362-910-10
4×20 SUS304 000-158-850-10
M3×8 SUS304 000-172-166-10
Code No. Qty
1
1
1
4
4
Mount Case
Chassis
Mount Base
Clamp
Cable Protector
4. INSTALLATION
Remarks
4-5