Table 10 - Sv Tracking Diagnostics - Honeywell SLG 700 User Manual

SV Low Method
Value
SV High Method
Value
Low Alarm Parameter
Limit
Low Parameter
Alarm
Counter
High Method
Alarm
Limit
High Parameter
Alarm
Counter
Change Method
Alarm
Limits
Reset SV Parameter
Tracking
Revision 5

Table 10 - SV Tracking Diagnostics

Description Minimum SV that the device has experienced in user
selected units.
Set-up None. Value initialized to Min SV Limit value prior to
leaving the factory. Updates to current SV automatically
when powered at user site after valid initial measurement.
Description Maximum SV that the device has experienced in user
selected units.
Set-up None. Value initialized to Min SV Limit value prior to
leaving the factory. Updates to current SV automatically
when powered at user site after valid initial measurement.
Description SV specified lower operating limit in user-selected units
Set-up None
Description Number of times SV Low Alarm Limit has occurred.
Set-up None
Description SV specified upper operating limit in user selected units.
Set-up None.
Description Number of times SV High Alarm Limit has occurred.
Set-up None
Description Changes alarm limits.
Set-up None.
Description Resets alarm counters to 0. Sets SV Low and High limit
values to current measured SV value...
Set-up None.
SLG 700 Series HART Option User's Manual
Page 53