Table 4 - Basic Configuration Parameters - Honeywell SLG 700 User Manual

Smartline level transmitter guided wave radar hart option
Hide thumbs Also See for SLG 700:
Table of Contents

Advertisement

Key:
Plain = Read only
Tag
Long Tag
Length Unit
Temperature Unit
Volume Unit
Velocity Unit
Date
Descriptor
Message
Clear message
Final assembly num
Revision 5

Table 4 - Basic Configuration parameters

Bold = Configurable
Bold underline = Method
General
Enter Tag ID name up to 8 characters long.
Enter Tag ID name up to 32 characters long.
m
Select the unit for all length related parameters.
cm
mm
in
ft
°C
Select the unit for all Temperature related parameters.
°F
liter
Select the unit for all volume related parameters.
ft3
in3
US gal
imp gal
bbl(liq)
yd3
m3
bbl
ft/s
m/s
in/min
m/h
ft/min
in/s
Gregorian calendar date that is stored in the Field
Device. This date can be used by the user in any way.
Enter any desired or useful descriptor of the
transmitter.
Enter a message up to 32 alphanumeric characters)
that will be sent to the Display. The message will be
shown on the Display interspersed with the configured
screens.
Select to clear message from transmitter's local
display.
Used for identify electronic components.
SLG 700 Series HART Option User's Manual
Bold italic = Table or graph
Select the unit for all Velocity (rate) related
parameters.
Page 17

Advertisement

Table of Contents
loading

Table of Contents