Summary - Honeywell SLG 700 User Manual

7.7.8

Summary

The Summary display is the last step of the Guided Setup mode and also the last menu option on
the Basic Configuration menu. This display provides a tabularized list of the current value of all of
the parameters available on the Basic Configuration menu, as shown below in Figure
DTM ensures that each of these parameters have been read from the transmitter whenever it is
opened, regardless if they were entered through the Guided Setup mode or not.
In addition to the parameters from the Basic Configuration menu, the Summary display also allows
the parameters available from the Advanced Configuration menu (see section 7.8) to be included
in the summary table. This can be done by clicking the Show Advanced Settings checkbox in the
top right-hand corner of the display. When this option is selected, the DTM first checks to see if all
of the Advanced Configuration parameters have been read from the transmitter yet. If all of the
Advanced Configuration displays have not been visited, it is likely that the DTM has not read all of
the parameters yet. In this case the DTM will display the following message box indicating that it
will take some time to read the advanced parameters and provide the user with the option to
cancel this operation.
The Save to File button located at the bottom of the Summary display allows the contents of the
Summary table to be written to a text file. Before performing this operation it is advisable to turn on
the Show Advanced Settings option.
Revision 5
Figure 15: Basic Configuration - Summary
SLG 700 Series HART Option User's Manual
15. The
Page 89