Table 5 - Advanced Configuration parameters, cont'd
Key:
Plain = Read only
None
Vol Calc.
Type
Ideal Tank
Shape
Strapping
Table
Calculation
Volume Offset
Config. Strapping Points
In Use
Volume Points in Use
Strapping Table
Refresh Strapping Table
Length Unit
(Read only)
Volume Unit
(Read only)
Wet Volume Calibration
Save Strap. Date
Strapping Records
Revision 5
Bold = Configurable
Bold underline = Method
Choose volume calculation method as Ideal tank shape if tank has ideal shape
such as Sphere or Cylinder. If tank has irregular shape then user can select
volume calculation type as Strapping Table Calculation and define Level to
Volume relationship in the table.
Note: Select Volume Calculation Type as None if Volume related device
variables (eg. Product Volume) are not required to be measured and
monitored by device.
Enter volume correction value, if desired.
2-50
2-50
In this dry volume strapping table, for each point enter a Level and a
corresponding Volume.
Press Send to download the table to the transmitter's memory.
Updates table with any changes made.
m
cm
mm
in
ft
L
ft3
in3
gallon
ImpGal
bbl liquid
yd3
m3
In this wet volume strapping table, enter a volume for the corresponding level
for each point. Press Send to download the table to the transmitter's memory.
Enter the date of creation/modification of the strapping table.
Read Only, Date as configured using "Save Strap Date".
SLG 700 Series HART Option User's Manual
Bold italic = Table or graph
Volume
Page 25