Download  Print this page

JVC KY-PZ100WU Instructions Manual

Hd ptz remote camera
Hide thumbs


Specifications and appearance of this unit are subject to change for further improvement without
prior notice.
For details on settings and operation, refer to "INSTRUCTIONS" on the website.
Please check the latest INSTRUCTIONS, tools, etc. from the URL below.
North America:
For Customer Use:
Enter below the Serial No. which is located
on the body.
Retain this information for future reference.
Model No.
Serial No.
(Installation/IP Address Settings)
Please read the following before getting started:
Thank you for purchasing this JVC product.
Before operating this unit, please read the
instructions carefully to ensure the best
possible performance.
In this manual, each model number is
described without the last letter (U/E) which
means the shipping destination.
(U: for USA and Canada, E: for Europe)
Only "U" models (KY-PZ100WU/KY-PZ100BU)
have been evaluated by UL.


Table of Contents

  Also See for JVC KY-PZ100WU

  Summary of Contents for JVC KY-PZ100WU

  • Page 1 Europe: China: Please read the following before getting started: Thank you for purchasing this JVC product. Before operating this unit, please read the instructions carefully to ensure the best For Customer Use: possible performance. Enter below the Serial No. which is located on the body.
  • Page 2: Important Safeguards

    FOR USA These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. IMPORTANT SAFEGUARDS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings.
  • Page 3: Safety Precautions

    RISK OF ELECTRIC undesired operation. SHOCK DO NOT OPEN Changes or modifications not CAUTION: approved by JVC could void the TO REDUCE THE RISK OF user’s authority to operate the ELECTRIC SHOCK. equipment. This equipment has been DO NOT REMOVE COVER (OR tested and found to comply with the BACK).
  • Page 5 When the equipment is installed in a When using the AC adapter in cabinet or on a shelf, make sure that it areas other than the USA has sufficient space on all sides to allow The provided AC adapter features for ventilation (10 cm (3-15/16") or more automatic voltage selection in the AC on both sides, on top and at the rear).
  • Page 6 FOR EUROPE IMPORTANT (for owners in the U.K.) This equipment is in conformity with the Connection to the mains supply in provisions and protection requirements of the United Kingdom. the corresponding European Directives. DO NOT cut off the mains plug from This equipment is designed for professional this equipment.
  • Page 7 European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of JVC KENWOOD Corporation is: JVC Technical Services Europe GmbH Konrad-Adenauer-Allee 1-11 61118 Bad Vilbel GERMANY Sehr geehrter Kunde, sehr geehrte Kundin, dieses Gerät stimmt mit den gültigen europäischen Richtlinien und...
  • Page 8 Importer (EU only) 12 Priestley Way, London NW2 7BA, UNITED KINGDOM Importeur (Nur EU) Konrad-Adenauer-Allee 1-11, 61118 Bad Vilbel, DEUTSCHLAND Importateur (EU uniquement) 7 Allee des Barbanniers, CS20034 92632 Gennevilliers Cédex, FRANCE Importatore (Solo EU) Via G. Sirtori 7/9, 20129 Milano, ITALIA Importador (Solamente EU) Ctra.
  • Page 9 For KY-PZ100WE, KY-PZ-100BE GB4943.1-2011 GB9254-2008 GB17625.1-2012 Safety Precautions...
  • Page 10 Consult your dealer as special technique is required when installing this product. Ensure that the fixing screws or nuts are tightened securely, otherwise, the unit may fall off. Mounting to a firm place As the unit contain parts rotating at high speed, mount it on a firm place with sufficient strength to support the vibration and weight of the unit.
  • Page 11: Table Of Contents

    Names of Parts ..........16 About microSD Cards ........19 Content of this manual Compatible microSD Cards ......19 All rights reserved by JVC KENWOOD DIP Switch Setting ........... 20 Corporation. Unauthorized duplication or reprinting of this manual, in whole or in part, is Installation/Connection strictly prohibited.
  • Page 12: Precautions

    Precautions Transportation o Do not throw away the original box of the unit. Keep it and use it for transporting the unit in future. Installation Location o The camera unit is designed to be rotated easily, secure the camera unit such that it does not rotate o Be sure to install the camera horizontally.
  • Page 13 o Do not use a pencil or ballpoint pen to write on the microSDHC/microSDXC Cards microSD card. Always use oil-based pens. o “microSDHC/microSDXC card” is referred to as o If you format (initialize) the microSD card, all data “microSD card” in this manual. recorded on the card, including video data and o This camera recorder saves the recorded images setup files, will be deleted.
  • Page 14 Encryption in Network Connection Others o Wireless LAN connections make use of an o This camera will perform the initial operation of encryption function. pan/tilt/zoom upon powering on. This encryption is designed for commercially-sold o The camera body may be captured in the equipment, and it cannot be altered.
  • Page 15 o An afterimage can appear if you view a moving object on the monitor output, however this is not a malfunction. o Do not insert objects other than the memory card into the card slot. o Do not put anything into the camera unit. Metal and flammable items entering from the connectors can result in fire or electric shock.
  • Page 16: Names Of Parts

    Names of Parts Bottom Section A Tripod socket hole A Camera head For attaching the tripod. Rotates horizontally. B Fall prevention wire mounting hole B Lens section C Ceiling mount bracket guide slot Rotates vertically. D DIP switch C Tally lamp Use the DIP switch to configure various Turns on/off according to the menu setting and settings.
  • Page 17 Terminal Section H [HDMI] HDMI terminal Output terminal for HDMI video signal. I [AUDIO IN] AUDIO input terminal For connecting the stereo mini plug. J [RS-422] RS-422 terminal For connecting the RS-422 cable. 4 6 8 Signal Signal Number Name Number Name TXD+...
  • Page 18: Infrared Remote Control

    Infrared Remote Control I PRESET number button Moves the display area to the recorded pan, tilt or zoom position. J MENU button Press and hold to open the menu for the camera unit. K PRESET button To be used concurrently with the PRESET number button.
  • Page 19: About Microsd Cards

    About microSD Cards Memo : If the microSD card contains files recorded by devices other than this camera recorder or files Compatible microSD Cards that are saved from a PC, the recordable time may be shorter or data may not be properly Bit Rate Setting and Usable microSD Card recorded.
  • Page 20: Dip Switch Setting

    2 to 4 Select protocol For selecting protocols. Setting values when LAN is set: 0: JVC; 1: D star; 2: Standard; 3 to 7: Reserved Setting values when Serial is set: 0: Reserved; 1: D star; 2: Standard; 3 to...
  • Page 21 Settings Left Select Set to LAN communication (OFF). mode 2 to 4 Select protocol Set to JVC (0). KY-PZ100 KY-PZ100 KY-PZ100 Left Right LAN cable 2 3 4 5 6 7 8 2 3 4 5 6 7 8 RM-LP100...
  • Page 22: Mounting The Camera To The Ceiling Mount Bracket

    Mounting the Camera to 2 Place the supplied template against the the Ceiling Mount Bracket ceiling, and fasten the ceiling mount bracket with four screws (M4 wooden screws: Φ4.1). Be sure to put on protective glasses to protect your eyes from falling objects when mounting the camera.
  • Page 23: Installing The Camera On The Ceiling

    Installing the Camera on Align the cutout of the ceiling mount bracket the Ceiling and the line indicated on the camera. Press the camera unit to insert, and then turn the camera clockwise. 5 Fix the camera and the fall prevention wire 1 Set the DIP switch.
  • Page 24: Installing The Camera On A Desktop

    Installing the Camera on a Attaching the Camera to a Desktop Tripod Set the DIP switch prior to installing the camera. Set the DIP switch prior to installing the camera. Place the camera on a flat surface. Attach a tripod using the screw hole at the Be sure to place the base of the camera bottom of this product.
  • Page 25: Connecting The Cables

    Connecting the Cables 6 Remove the protective sheet attached to the infrared remote control sensor. 1 Connect the power cable. Caution : To supply power from an AC adapter, For safety reasons, turn on the power only after connect an AC adapter cable. ensuring that all the connections are in place.
  • Page 26: Ip Address Settings

    IP Address Settings Using the IP Setting Tool Connect the camera to be configured to the network via the LAN terminal. Download the “IPSettingTool” from the URL stated on the cover page. Connect the computer for executing the If setting is successful, the search list display “IPSettingTool”...
  • Page 27: Confirm The Connection

    The default IP address of camera is http:// 2 Enter the user name and password. Enter the user name (jvc) and the password (initial password: 0000) on the login screen to display the Live View screen. Confirm the connection...
  • Page 28: Troubleshooting

    Troubleshooting Problem Symptom Action Power does not turn on. The AC adapter is not properly Check whether the AC adapter is properly connected. connected. There is problem in the connection Check whether connection is with the PoE+ (IEEE802.3at Type2) established using a PoE+ power supply device.
  • Page 29 Problem Symptom Action Cannot connect to Wireless LAN is not correctly Check the mode of connection and wireless LAN. configured. method of setting ([SSID] and [Passphrase] in cases other than “WPS”). The passphrase is incorrect. Even if the passphrase is wrong, “Completed the Setup Wizard.
  • Page 30: Specifications

    Specifications Item Description [RS-232C IN] Mini DIN 8-pin Input terminal for RS-232C terminal General remote control unit [RS-232C OUT] Mini DIN 8-pin Item Description Output terminal for RS-232C terminal Power DC 12 V (when an AC adapter is remote control unit used) (Termination function) DC 42 V to 57 V (when PoE+...
  • Page 31 Video/Audio Item Description Streaming Mode (When the [USB] terminal is Item Description connected) HD mode (QuickTime) Video 1920×1080 (59.94p, 50p) 12/8 Recording file QuickTime File Format Mbps format 1920×1080 (59.94i, 50i, 29.97p, Video 25p) 12/8/5/3 Mbps 50M mode MPEG-4 AVC/H.264, 50 Mbps 1280x720 (59.94p, 50p) (LPCM) (Max)
  • Page 32 Dimensional Outline Drawing (Unit: mm) * The specifications and appearance of this product are subject to changes for further improvement without prior notice. Specifications...
  • Page 33: Software License Agreement

    “Licensed Software”) provided by the possession of the User, and that the User shall JVC KENWOOD Corporation (hereinafter the cause the transferee to comply with this Software “Licensor”) is copyrighted to or sublicensable by License Agreement.
  • Page 34 Article 8 Termination In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement;...
  • Page 35: Important Notice Concerning The Software

    A Start up Live View. components (hereinafter the “Licensed Software”), B Open the [MENU] tab and click the [MENU] a copyright of either JVC KENWOOD Corporation button to display the camera menu. (hereinafter “JKC”) or a third party subsists. C Select [Main Menu] B [System] B [System The Product uses the software component Information] B [Open Source License].
  • Page 36 B5A-1712-00 © 2016 JVC KENWOOD Corporation...

This manual is also suitable for: