Flashforge FINDER Start Up And Instruction Manual page 14

————————————————————————————————————————————
Add Support
Supports will be added once clicking the [Add] button. Move the cursor to the position where
needs supports, left-click to choose the starting point of supports, hold down the left mouse
button and drag the mouse the supports preview will show up(if support surface doesn't need
support or the support column angle is too large, will highlight the support review ).Loosen the
left mouse button, if support column doesn't meet with model, then support will be generated
on origin and terminal point(the highlighted preview support won't generate support structure )
Delete Supports
Supports will be deleted once clicking the [Delete] button. Move the cursor to the supports
needed deleting, current supports and its child node support will be highlighted, click the left
mouse button to delete these highlighted support.
Supports
Click the Supports icon on the main interface, an option box will appear, supports options include
"treelike"and "linear", when choose "treelike", click [OK], then the support generated will be
treelike structure; when choose "linear", click [OK], then the support generated will be linear
structure; if the model already had support, when you choose one of the supports options,
software will judge whether existing supports need to be deleted or not depend on the type of
existing support, and will pop up the corresponding prompt to let you make the choice.
New Project
Click [File]--[New Project] can build a blank project. If there is an unsaved modification on
previous project, then will inform you whether the modification needs to be saved or not. Click
[Yes] will save the modification, click [No] will abandon it. If click [Cancel] or close tool tip, then
will cancel the new project.
13