Printing Via Usb Flash Drive; Printing Via Flashcloud; Model Removal After Finishing Printing - Flashforge Creator 4 User Manual

4.2 Printing via a USB Flash Drive
The equipment can perform printing via a USB flash drive: save the sliced file to the
USB flash drive, insert the USB flash drive into the equipment, and select the
corresponding file to print.

4.3 Printing via FlashCloud

Printing via FlashCloud
1. Enter the FlashCloud website, register your account, and then you can log in and
use it after the email activation.
FlashCloud: https://cloud.sz3dp.com
FlashCloud
Home
My Printer
Name
My Printer
My Model
My Job
Model Library
2. Click the [My Printer]-[Add Printer].
Fill in the registration number (cloud registration code) on the "Add Printer" page,
and name the printer. After clicking the "OK", these information will appear in the
FlashCloud interface of the printer.

4.4 Model Removal After Finishing Printing

·
Warning
·
+
Add Printer
The current printer is empty, please add a printer
Add Printer
All fields must be filled in
Name
Registration Code
When removing the model from the build plate, please pay
attention to the need to wait for the platform to cool down
before operating. At this time, you can check the temperature
icon on the status bar of the screen to confirm the platform
temperature. The green icon indicates that the platform
temperature is lower than 50℃, then you can operate it safely.
The matching gloves can be used when removing the model,
and attention must be paid to the high temperature of the
equipment.
Registration Code
OK Cancel
15
Cn
Type