Wall Mounting The Unit - Vent-Axia 405215 Advance S Installation & Commissioning Manual

Installation

Wall Mounting the Unit

Step 1: Mark the wall bracket position
using the dimensions shown. Note the
position of the top of the unit in relation
to the wall bracket. Ensure the bracket
position is horizontal.
Step 2: Attach the wall bracket to the
wall using appropriate fixings.
Step 3: Lift the unit and locate the two
hooks on the rear onto the wall bracket.
Step 4: Use the two adjusters at the
bottom of the unit to ensure the base of
the unit is horizontal in both axis. Lock
the adjusters in the correct position
using the two M6 nuts.
12
Sentinel Kinetic Advance MVHR Installation & Commissioning Instructions PN 408651