Entering Names - Sanyo SFX-110 Instruction Manual

Entering names
Before programming the dialing memory or your station name, you need to know to enter
names using number keys and one-touch keys.
The number keys [2], [4], [5], [6], [8] and [0], the one-touch keys [5], [6] and [8] are used for
name programming.
The characters are grouped as shown below
aaa
Dam
Group 1
Group 2 Group 3
-mm
ABCDE abcde 12345
FGHIJ fghij 67890
KLMNO klmno
. .
.,. ,
PQRST pqrst
+-l&
UVWXY Uvwxy #
I !,
(
z
*
Reg;is~tion Selection
Area
~~
z <>!?'=
H
:ABCDE
—
ONE TOUCH DIAL
Cur40r 1 Curior 2
SPEED DIAL
(o o) o
TONE
(o o) o
45
REDIALfP
(o 6 0
HOLD
(o 0] o
DELETE
The LCD display is divided into 2 sections: The registration area (left) shows the name being
entered, and in the selection area (right), a set of 5 characters appears as you scroll up or
down the display. Each area has a separate cursor.
Selecting a character
1. Use number key [5] to select the desired character group.
The first line of the selected group appears each time the number key [5] is pressed.
2. Use number keys [2] or [8] to scroll up or down the display.
3. Use number keys [4] or [6] to move the cursor 2 to select a character.
4. Press [ } ] (one-touch key 6) to enter the selected character into registration area. The
cursor 1 moves to the right.
5. Repeat steps 1-4 to finish writing a name.
62