Resetting Answering System - Sanyo SFX-110 Instruction Manual

The initialization commands allow you to reset various programmed features of the
answering system to the factory-set default settings.
ERASE ALL MSGS
ERASE GREETING
RESET TO DEFLT
CLEAR ALL
1. Press [MENU] 5 times.
2. Press [SET1.
3. Press [MENU] 4 times.
4. Press [SET'J.
To erase all recorded messages
To erase your greeting
To reset the following features to the
factory-set default values:
Password
Message recording mode
Auto message erase
Toll saver
To reset all of the above.
5: SET ANSW MODE?
I
I
5. Press [MENU] to select the command you
want to perform from the choices shown above.
6. Press [SET1.
Repeat steps 5 to 6 to perform
other commands.
A beep sounds if you select "CLEAR ALL or
"RESET TO DEFLT" at step 5.
7. Press [STOP] twice to return to stand-by mode.
If you select "CLEAR ALL" or "RESET TO DEFL7
at step 5, press [STOP] once to return to stand-by
mode.
1 :PASSWORD ?
15: RESET ANSWRER?I
CLEAR ALL ?
I
I
ERASE GREETING ?
IRE SET TO DEFLT ?I
/26 Jun.
12:00 001
Il
.
61