Table of Contents
Advertisement
FAX only use
If you have a dedicated fax line, it is recommended
to change the first ring counts
(Feature switch No. 07) to 2 rings (code# 02), and the second ring counts (Feature
switch No. 09) to the O'FF (code-# 0'0) position.
Notice to New Zealand users:
The first set of ring in the Auto mode should be left as factory set or if changed
should only be set between 2 rings and 5 rings to ensure ongoing compliance
with
Telecom specifications
for this Telepermitted
equipment.
What to do if you answer a fax call before the SFX-1 10/21 O connect
to the line.
If you use the handset of SFX-I 10/21 O, fax reception starts
automatically.
Replace the handset.
If you pick up the call from an extension telephone connected to
the SFX-1 10/210 through the line plug, press [3] and then [3]
firmly on the extension phone to activate fax reception.
I
See Remote reception on pages 45.
Remote reception activation number can be changed to any 2-digit
number from 10 to 99.
(The default setting of the remote reception number ia set to [3], [3] by festure
switch No. 08)
Pressing the [STARTl key on the SFX-I 10/21 O will always initiate
fax reception.
39
Hide quick links:
Advertisement
Table of Contents
