Sanyo SFX-110 Instruction Manual page 51

6. Press [MENU] to select a Refuse list number from 01 to 20.
(01)
The number display scrolls one at a time
:SET
as you press [MENU].
7. Enter the last 4 digits of the number you want
to refuse.
(01) 123~ :SET
I
Example:1234
8. Press [SET'J.
* A beep sounds.
(01)1234 :SET
*
To program other numbers, repeat
steps 6-8.
9. Press [STOP] twice to return to stand-by mode.
SFX-21O: 26 Jun.
12:00 00
SFX-I1O: 26 Jun. '96 12;00
If you make a mistake when entering the number, press [DELETE] and then re-enter
the correct number.
c When a caller whose number is programmed in your Refuse list calls you, the SFX-1 10/21 O
rings and you can talk to the caller.
" To turn off selective reception feature, change the feature switch No. 26 setting to OFF.
To change a number programmed in the Refuse list:
1.
2.
3.
4.
5.
6.
Operate steps 1-5 above.
Press [MENU] to select the Refuse list number
you want to change.
Press [DELETE].
Enter the new 4 digits.
Press [SETJ
+ A beep sounds.
Press [STOP] twice.
To delete a number programmed in the Refuse list:
1. Operate steps 1-4 of the programming procedure.
2. Press [MENU] to select "2:DELETE".
3. Press [SET1.
4. Press [MENU] to select the Refuse list number you want to delete,
5. Press [SET1.
* A beep sounds. Repeat steps 4-5.
6. Press [STOP] twice.
49