Timer Transmission - Sanyo SFX-110 Instruction Manual

Timer transmission
The SFX-1 10/21 O can be programmed for delayed fax transmission. The delayed start time
can be set up to 24 hours in advance. A maximum of 10 pages can be sent to one
destination using the timer feature.
1. Place the original document face down.
Adjust the paper guide to the width of the document
2. Select a contrastiresolution mode if
necessary. (See page 30.)
3. Press [MENU] 3 times.
4. Press [SETJ
5. Enter a delayed starl time using the number keys.
(The start time must be entered using the 24-hour system.)
Example: 13:30
6. Press [SET.
7. Enter the fax number.
You can use one-touch dial, speed dial
or number keys.
Example: One-touch dial 1.
8. Press [SET'J
~ A beep sounds.
I STD
NORMAL I
I STD
NORMAL \
3: TIMER Tx. ?
;ll
START TIME
:9,
START TIME 13:3~
lpARTy ?
I
Al ison McNab
<TIMER Tx. 13:30>
Press [STOP] to interrupt a transmission or to remove a document set for transmission.
If you make a mistake when entering start time at step 5, press [DELETE] then enter the
correct time.
If you make a mistake when entering the number at step 7, press [STOP], then enter the
correct number.
35