Contrast/Resolution - Sanyo SFX-110 Instruction Manual

Contrast/Resolution
DIAL
AUTOI
BANK
MANUAL
~o~o
RESOLUTION CONTRAST
00
The SFX-1 10/21 O allows you to select different
contrasVhalftone and resolution modes for fax
transmission and copying. Select the most suitable mode
for your original document after placing in the original tray.
You can also set the SFX-1 10/21 O either to remain in the
selected mode until another selection is made, or to return
to the default mode after each transmission/copying.
Use the feature switches No. 27 and 28 to switch between
Not return and Return home modes.
The initial factory setting is in the Not return position.
(See pages 77-78 and 80.)
1. Place the original document in the original document tray.
The first page advances slightly, and the display changes to:
STD
NORMAL
This indicates that the unit is currently set to standard resolution (STD)
and normal contrast (NORMAL) mode.
2. Press the [CONTRASTl and [RESOLUTION] keys 1 to 3 times to select the desired mode.
[CONTRASTl
NORMAL
4
LIGHT
4
HAL~ONE
[RESOLUTION]
STD
4
FINE
4
SUPERFINE
For normal contrast documents.
For low contrast documents which need to be transmitted or copied
darker.
For transmitting or copying halftone documents.
(photographs, for example).
When HAL!70NE is selected, the resolution mode is
automatically set to FINE.
For text in standard typefaces.
For text with fine type and for drawings.
For text with very small characters and/or graphics.
The superfine communication mode is possible only with
Sanyo fax models with the superfine feature and with non-Sanyo
models that have international standard (ITU-T) superfine feature.
30