Sanyo SFX-110 Instruction Manual page 62

9. Enter the number of ring delay count'
you want when there are incoming
messages recorded.
* For Australia:
between 2 and 9
* For New Zealand:
between 2 and 5
Example: 3
10. Press [SET'J.
+ A beep sounds.
11. Press [STOP] to return to stand-by mode.
MESSAGES RINGS
5: RESET AN SWRER?
126 Jun.
12:00 001
The "No messages" ring delay counts must be set at least 2 rings greater than the "With
messages" ring delay.
When the Toll Saver feature is OFF, the SFX-21 O rings as programmed by the ring delay
feature switch No. 07.
Notice to New Zealand users:
The ring delay counts should be left as factory set or if cahnged should only be set
between 2 rings and 5 rings to ensure ongoing compliance with Telecom specifications for
this Telepermitted equipment.