Table of Contents
Advertisement
Precautions
Placement precautions
Avoid placing the unit in humid or dusty places, or in places where it will be exposed to
excessive heat (direct sunlight, heaters, etc.).
Do not step on or set anything on the AC cord. DAMAGE TO THE AC CORD IS A SAFETY
RISK AND CAN CAUSE A FIRE.
Install the unit only on a stable surface.
Do not connect the unit in the same AC power wall outlet as appliances that generate large
amounts of interference (heaters with thermostats, appliances with motors, etc.). It is best to
use a completely separate electrical outlet.
Keep the unit away from water. If water accidentally enters the unit, unplug the power cord
immediately.
DO NOT PLUG THE UNIT AGAIN. Contact an authorized Sanyo service
center or dealer.
Handling precautions
c Do not remove any parts that are held in place with screws. (The unit does not contain any
user-serviceable items.)
Maintain standard room temperature 5"C-350C (410F-950F) during use. Do not subject the
unit to shock or vibration.
Do not move the unit while it is in use.
A rapid increase in room temperature in cool weather can cause condensation to form inside
the unit. If this happens, wait at least 15 minutes after turning the unit on before attempting to
operate it. Failure to do so may result in paper jams and/or poor print quality.
When cleaning the cover or operation panel of the unit, wipe gently using a damp cloth to
which a small amount of a neutral detergent has been added. NEVER USE SOLVENTS OR
CHEMICALLY TREATED CLOTHS.
Lkhium Battery
"CAUTION" Danger of explosion if battery is incorrectly
replaced.
Replace only with the same of equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturers instructions.
Hide quick links:
Advertisement
Table of Contents
