Selecting An Emulation - Fujitsu TM 14ADV User Manual

Selecting an Emulation

Selecting an
Emulation
1-20
This printer has two emulations (PCL and FPS) as a standard
feature. You can use these emulations to connect your printer to
different computers. PCL emulates HP LaserJet 4 printers and FPS
emulates PostScript Level 2 compatible printers.
With default settings, the printer automatically selects the active
emulation. To specify an emulation, select the emulation using the
control panel. Use the Personality menu of the Config menu as
shown below.
POWER
ONLINE DATA
READY
FORM
READY FEED MENU
RESET
MENU
TRAY
CONT. SELECT ENTER
RESET MFF SELF
PAPER SIZE TEST
POWER
ONLINE DATA
SETUP MENU
CONFIG MENU
POWER
ONLINE DATA
PERSONALITY
The selected emulation is selected (an asterisk is followed). Once you
change the emulation, the other menus automatically change to
reflect the options and functions of the new emulation. For details of
the setup menu, see Chapter 3.
1. Enter setup mode. Press
ERROR
the
the printer offline (the
ONLINE indicator turns
off). Then, press the
button briefly six times.
+
The message display
indicates
–
CONFIG MENU
PRINT
FONT
2. Select the Personality
ERROR
menu. Press the
button briefly. The message
display indicates
PERSONALITY AUTO*
3. Select emulation. Press the
ERROR
option
AUTO*
PCL
AUTO
button when the desired
option is displayed.
button to put
SETUP MENU
.
.
button briefly. The
AUTO changes to
, PS , then back to
. Press the
User's Manual