For Standard Rail Mounting; Shield Connection Kit - Siemens Sinamics G120 Hardware Installation Manual

Spare parts and accessories
8.3 Optional accessories
8.3.9

For standard rail mounting

With the adapter for DIN mounting rail (DIN Rail Mounting Kit, DRMK), without requiring any
tools, you can snap the inverter onto the two parallel mounting rails - and easily remove
them again using a screwdriver.
Power Modules, frame sizes FSA and FSB, can be mounted on rails.
● Frame size FSA with a base component.
● Frame size FSB without a base component
The adapter has an integrated shield connection plate to connect the motor cable shield.
The installation grid for DIN mounting rails is 115 (± 1) mm.
Mounting the DIN mounting rail adapter (DRMK)
You can find the mounting instructions for the DIN mounting rail adapter in the Internet at:
(https://support.industry.siemens.com/cs/ww/en/view/23622394)
8.3.10

Shield connection kit

The shield connection kit is used to connect the shield of the control and motor cable in an
EMC-compliant fashion.
The instructions for installing the shield connection kit are available in the Internet at
(https://support.industry.siemens.com/cs/ww/de/view/23621093/en):
Article numbers of the shield connection kit for different Power Modules
● FSA:
● FSB:
● FSC:
● FSD:
● FSE:
● FSF:
108
6SL3262-1AA00-0BA0
6SL3262-1AB00-0DA0
6SL3262-1AC00-0DA0
6SL3262-1AD00-0DA0
6SL3262-1AD00-0DA0
6SL3262-1AF00-0DA0
Hardware Installation Manual, 07/2016, A5E36985441C AA
Power Modules PM240