Sine-Wave Filter - Siemens Sinamics G120 Hardware Installation Manual

Spare parts and accessories
8.3 Optional accessories
8.3.5

Sine-wave filter

The sine-wave filter at the inverter output limits the voltage rate-of-rise and the peak voltages
at the motor winding. The maximum permissible length of motor feeder cables is increased
to 300 m.
The following applies when using a sine-wave filter:
● Operation is only permissible with pulse frequencies from 4 kHz to 8 kHz.
From 110 kW power rating of the Power Modules (according to the rating plate) only
4 kHz is permissible.
● The inverter power is reduced by 5%.
● The maximum output frequency of the inverter is 150 Hz at 380 V to 480 V.
● Operation and commissioning may only be performed with the motor connected, as the
sine-wave filter is not no-load proof.
● An output reactor is superfluous.
Dimensions, drilling patterns and weights
FSA ... FSC footprint filters (base component)
Sine-wave filter
6SL3202-0AE20-3SA0
6SL3202-0AE20-6SA0
6SL3202-0AE21-1SA0
6SL3202-0AE21-4SA0
6SL3202-0AE22-0SA0
6SL3202-0AE23-3SA0
94
Overall dimensions Drilling dimensions
(mm) (mm)
W H D
75.5 200 110
75.5 200 110
153 270 100
153 270 100
189 336 140
189 336 140
Hardware Installation Manual, 07/2016, A5E36985441C AA
Fixing/torque
(Nm)
b h g
56 187 202
56 187 202
133 258 286.5
133 258 286.5
167 323 351.5
167 323 351.5
Weight
(kg)
4 x M4 / 2 2.6
4 x M4 / 2 3
4 x M4 / 2 6
4 x M4 / 2 10
4 x M5 / 3 12
4 x M5 / 3 23
Power Modules PM240