Component Specification According To Ul - Siemens Sinamics G120 Hardware Installation Manual

Introduction

3.2 Component specification according to UL

Note
Commissioning the inverter
You must first commission the inverter before you can use it. Commissioning is described in
the operating instructions of the relevant Control Unit.
3.2 Component specification according to UL
The components of the SINAMICS G120 product family are UL-certified. The certification is
indicated on the products using the UL Listing Mark.
If the inverter is protected using semiconductor fuses, then the fuses must be installed in the
same electrical cabinet as the inverter itself.
You can find proof of the certification on the Internet UL certificates (http://www.ul.com)
under "Tools / Online Certifications Directory" by entering the file number or the "Name".
The UL file number for the Power Modules of the SINAMICS G120 product family is:
● E121068 for FSA, FSB and FSC
● E192450 for FSD, FSE, FSF and FSGX
20
Overview of the manuals (Page 109)
Hardware Installation Manual, 07/2016, A5E36985441C AA
Power Modules PM240