Din Rail Mounting Kit; Screen Termination Kit - Siemens SINAMICS G120 Hardware Installation Manual

7.5

DIN rail mounting kit

Function
The DIN rail mounting kit (DRMK) is designed to allow the SINAMICS G120 FSA and FSB
inverters to be mounted on a pair of parallel DIN rails.
The DRMK provides an integrated screening plate to allow for the termination of the
screened motor cables and other screened cable used with the inverter.
The DRMK for FSA allows for the mounting of either the inverter as a stand-alone or with the
inverter and the footprint filter. The FSB inverters, due to their physical size and weight can
only be mounted as stand-alone inverters.
The required DIN rail pitch for frame size FSA and FSB is 115 (± 1) mm.
Mounting the DRMK
The mounting description of the DRMK is available in the internet:
http://support.automation.siemens.com/WW/view/en/23622394
7.6

Screen termination kit

Function of the screen termination kit
The screen termination kit has been designed to allow the termination of control, mains and
power cables to ensure the correct electrical grounding to the inverter.
For FSA the screen termination kit provides for the termination of 3 screened cables.
For FSB and larger the screen termination kits provides for the termination of at least 4
screened cables.
Mounting the screen termination kit
The mounting description of the screen termination kit is available in the internet:
http://support.automation.siemens.com/WW/view/en/23621093
Power Module PM240
Hardware Installation Manual, 07/2009, A5E00807525B AD
Accessories
7.5 DIN rail mounting kit
123