Rack-Mounting The Chassis - Cisco ASA 5505 Hardware Installation Manual

Installing the Chassis

Rack-Mounting the Chassis

To rack-mount the chassis, perform the following steps:
Attach the rack-mount brackets to the chassis using the supplied screws. Attach the brackets to the holes
Step 1
as shown in
Figure 3-5
Attach the chassis to the rack using the supplied screws, as shown in
Step 2
Figure 3-6
.
To remove the chassis from the rack, remove the screws that attach the chassis to the rack, and then
remove the chassis.
Cisco ASA 5500 Series Hardware Installation Guide
3-6
Figure 3-5. After the brackets are secured to the chassis, you can rack-mount it.
Installing the Right and Left Brackets
Rack-Mounting the Chassis
CIS CO
AS A 554
POW ER
STA TUS Ada ptiv 0 SER IES
e Sec urit
ACT IVE y App lian
VPN
FLA SH ce
Chapter 3 ASA 5510, ASA 5520, ASA 5540, and ASA 5550
Figure 3-6.
78-17374-01