Cisco ASA 5505 Hardware Installation Manual page 48

Installing the Chassis
SSM
e.
–
–
Note
Figure 3-15
1
Cisco ASA 5500 Series Hardware Installation Guide
3-14
Connect one RJ-45 connector to the management port on the SSM, as shown in
Connect the other end of the RJ-45 cable to your network devices.
SSMs are optional, this connection is necessary only if you have installed an SSM on the
adaptive security appliance.
Connecting to the Management Port
1
2
SSM management port 2
Chapter 3
RJ-45 to RJ-45 cable
ASA 5510, ASA 5520, ASA 5540, and ASA 5550
Figure
78-17374-01
3-15.