Product Overview - Cisco ASA 5505 Hardware Installation Manual

Product Overview

Product Overview
This section describes the front and rear panels.
Figure 3-1
1
2
3
4
5
Figure 3-2
Figure 3-2
1 Management port
2 External CompactFlash slot 7
3 Serial Console port
4 Power switch
5 Power indicator LED
1. The management 0/0 interface is a Fast Ethernet interface designed for management traffic only.
2. Not supported at this time.
3. GigabitEthernet interfaces, from right to left, GigabitEthernet 0/0, GigabitEthernet 0/1, GigabitEthernet 0/2, and
Cisco ASA 5500 Series Hardware Installation Guide
3-2
Front Panel LEDs
LED Color State
Power Green On
Status Green Flashing The power-up diagnostics are running or the system is booting.
Solid
Amber Solid
Active Green Flashing There is network activity.
VPN Green Solid
Flash Green Solid
shows the rear panel.
Rear Panel LEDs and Ports (AC Power Supply Model Shown)
1
GigabitEthernet 0/3.
Chapter 3
Figure 3-1
POWER STATUS ACTIVE
1 3
2
Description
The system has power.
The system has passed power-up diagnostics.
The power-up diagnostics have failed.
VPN tunnel is established.
The CompactFlash is being accessed.
1
LINK SPD LINK SPD LINK SPD LINK SPD
3 2 1 0
8
6
7
9
2
6 USB 2.0 interfaces
3
Network interfaces
8 Power indicator LED
9 Status indicator LED
10 Active LED
ASA 5510, ASA 5520, ASA 5540, and ASA 5550
shows the front panel LEDs.
CISCO ASA 5540
Adaptive Security Appliance
VPN FLASH
5
4
3
2 4
5
FLASH
10 12
14
13
11
11 VPN LED
12 Flash LED
13 AUX port
14 Power connector
SERIES
78-17374-01