Rack-Mount The Chassis; Unpack And Inspect The Chassis - Cisco M195 Hardware Installation Manual

Rack-Mount the Chassis

•
•

Unpack and Inspect the Chassis

Note
The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or any
items are missing, contact your customer service representative immediately. Keep the shipping container in
case you need to send the chassis back due to damage.
See Package Contents, on page 4
Step 1
Remove the chassis from its cardboard container and save all packaging material.
Step 2 Compare the shipment to the equipment list provided by your customer service representative. Verify that you have all
items.
Step 3 Check for damage and report any discrepancies or damage to your customer service representative. Have the following
information ready:
• Invoice number of shipper (see the packing slip)
• Model and serial number of the damaged unit
• Description of damage
• Effect of damage on the installation
Rack-Mount the Chassis
You can install the chassis in a rack using the Cisco rack kit (part number 800-43376-02).
The rack must be of the following type:
Unpack and Inspect the Chassis, on page 33
Rack-Mount the Chassis, on page 33
Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide
C H A P T E R
for a list of what shipped with the chassis.
3
33