Cisco ASA 5505 Hardware Installation Manual page 49

Chapter 3 ASA 5510, ASA 5520, ASA 5540, and ASA 5550
Ethernet ports
f.
–
–
Figure 3-16
1
Connect the power cord to the security appliance and plug the other end to the power source. For
Step 4
information on powering on a DC model, see the
Power on the chassis.
Step 5
78-17374-01
Connect the RJ-45 connector to the Ethernet port.
Connect the other end of the Ethernet cable to your network device, such as a router, switch or
hub.
Connecting Cables to Network Interfaces
LNK SPD LNK SPD LNK SPD LNK SPD
3 2 1
1
RJ-45 Ethernet ports 2
0
2
RJ-45 connector
"Installing the DC Model" section on page
Cisco ASA 5500 Series Hardware Installation Guide
Installing the Chassis
B-8.
3-15