Appendix; Maintenance And Upgrade Procedures; Removing And Replacing The Chassis Cover - Cisco ASA 5505 Hardware Installation Manual

Maintenance and Upgrade Procedures

This appendix describes how to install and replace the chassis cover, the power supply, and the
CompactFlash. This appendix includes the following topics:
•
•
•
•
•

Removing and Replacing the Chassis Cover

This section describes how to remove and replace the chassis cover from the adaptive security appliance.
This section includes the following topics:
•
•
Removing the Chassis Cover
To remove the chassis cover, perform the following steps:
Removing the chassis cover does not affect Cisco warranty. Upgrading the adaptive security appliance
Note
does not require any special tools and does not create any radio frequency leaks.
Read the Regulatory Compliance and Safety Information for the Cisco ASA 5500 Series document.
Step 1
Power off the adaptive security appliance. Once the upgrade is complete, you can safely power on the
Step 2
chassis.
Before working on a system that has an On/Off switch, turn OFF the power and unplug the power cord.
Warning
Statement 1
OL-10089-01
Removing and Replacing the Chassis Cover, page B-1
Working in an ESD Environment, page B-4
Removing and Replacing the Power Supply, page B-4
Installing the DC Model, page B-8
Removing and Replacing the CompactFlash, page B-10
Removing the Chassis Cover, page B-1
Replacing the Chassis Cover, page B-3
A P P E N D I X
Cisco ASA 5500 Series Hardware Installation Guide
B
B-1