Cisco ASA 5505 Hardware Installation Manual page 43

Asa 5500 series
Hide thumbs Also See for ASA 5505:
Table of Contents

Advertisement

Chapter 3
ASA 5510, ASA 5520, ASA 5540, and ASA 5550
Management port
a.
The adaptive security appliance has a dedicated management interface referred to as the Management0/0
port. The Management0/0 port is a Fast Ethernet interface with a dedicated port used only for traffic
management.
Note
Figure 3-9
1
Management port
78-17374-01
You can configure any interface to be a management-only interface using the management-only
command. You can also disable management-only mode on the management interface. For more
information about this command, see the management-only command in the Cisco Security
Appliance Command Reference.
Connect one RJ-45 connector to the Management0/0 port, as shown in
Connect the other end of the Ethernet cable to the management port on your computer or
network device.
Connecting to the Management Port
1
LNK SPD
LNK SPD
LNK SPD
2
1
3
2
2
LNK SPD
0
RJ-45 to RJ-45 Ethernet cable
Cisco ASA 5500 Series Hardware Installation Guide
Installing the Chassis
Figure
3-9.
3-9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asa 5550Asa 5510Asa 5520Asa 5540

Table of Contents