Mount And Connect; Unpack And Inspect The Chassis; Rack-Mount The Chassis - Cisco Firepower 1600 Hardware Installation Manual

Mount and Connect

•
•
•

Unpack and Inspect the Chassis

Note
The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or any
items are missing, contact your customer service representative immediately. Keep the shipping container in
case you need to send the chassis back due to damage.
See Package Contents, on page 3
Step 1
Remove the chassis from its cardboard container and save all packaging material.
Step 2 Compare the shipment to the equipment list provided by your customer service representative. Verify that you have all
items.
Step 3
Check for damage and report any discrepancies or damage to your customer service representative. Have the following
information ready:
• Invoice number of shipper (see the packing slip)
• Model and serial number of the damaged unit
• Description of damage
• Effect of damage on the installation

Rack-Mount the Chassis

You can install the chassis in a rack using the Cisco rack kit.
Unpack and Inspect the Chassis, on page 29
Rack-Mount the Chassis, on page 29
Connect Cables, Turn on Power, and Verify Connectivity, on page 32
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
C H A P T E R
for a list of what shipped with the chassis.
3
29