Mount The Chassis; Unpack And Inspect The Chassis; Rack-Mount The Chassis - Cisco Firepower 1100 Series Hardware Installation Manual

Mount the Chassis

•
•

Unpack and Inspect the Chassis

Note
The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or any
items are missing, contact your customer service representative immediately. Keep the shipping container in
case you need to send the chassis back due to damage.
See Package Contents, on page 4
Step 1
Remove the chassis from its cardboard container and save all packaging material.
Step 2 Compare the shipment to the equipment list provided by your customer service representative. Verify that you have all
items.
Step 3 Check for damage and report any discrepancies or damage to your customer service representative. Have the following
information ready:
• Invoice number of shipper (see the packing slip)
• Model and serial number of the damaged unit
• Description of damage
• Effect of damage on the installation

Rack-Mount the Chassis

The chassis ships with rack-mount brackets, which you can install on the front or the rear of the chassis.
Unpack and Inspect the Chassis, on page 17
Rack-Mount the Chassis, on page 17
C H A P T E R
for a list of what shipped with the chassis.
Cisco Firepower 1100 Series Hardware Installation Guide
3
17