Operation; Safety; Control And Indicating Elements; Operation 4.1 Safety - Optimum BF20 V Operating Manual

4

Operation

4.1

Safety

Commission the mill drill only under the following conditions:

The mill drill is in proper working order.

The mill drill is used as prescribed.

The operating manual is followed.

All safety devices are installed and activated.
All failures should be eliminated immediately. Stop the mill drill immediately in the event of any
problem in operation and make sure it cannot be start up accidentally or without authorisation.

"For your own safety during operation" on page 14
4.2

Control and indicating elements

2
Pos. Description
1 Cover of draw-in rod
3 Digital display fine feed of spindle
5 Crank for height adjustment of the mill drill head
7 Star grip for spindle feed
9 Fine adjustment of spindle
Version 3.1.8 dated 2015-1-27
1
3
9
4
Fig.4-1: mill drill
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
6
5
8
7
Pos. Description
2 Control panel
4 Spindle protection
6 Selector switch for reduction stage
8 Activation of the fine feed
BF20V US
Page 23