Repair - Optimum BF20 V Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y
Interval Where?
every six
months
INFORMATION
The spindle bearing is lifetime-lubricated. It is not necessary to lubricate it again.
5.3

Repair

Repairs must be carried out only by qualified technical staff; and must follow the instructions
and guidelines given in this manual. Should technical assistance be required, contact LDS
Industries at (630) 785-6437.
Optimum Maschinen - Germany and LDS Industries are not liable for, nor do they guarantee
against, damage or operating malfunctions resulting from alteration, abuse, lack of main-
tenance or this product's use for other than its intended purpose. Failure to read and follow this
operating manual is not covered.
For repairs only use

Proper and suitable tools,

Parts purchased from Optimum, or its authorized agent.
US BF20V
Page 36
What? How?

Turn the drill-mill head as described under
ling the mill drill head" on page 32 completely by 90° to
the right.

Check if the clamping screws are firmly tightened as
described under
page 32 and that the drill-mill head can not independently
tilt.

Disassemble the cover plate at the rear.

Lubricate the gearwheels.
16
Lubricating
Original operating instructions

"Swivelling the mill drill head" on

"Service material" on page
Cover plate
Fig.5-5: Rear
Version 3.1.8 dated 2015-1-27

"Swivel-