Swivelling The Mill Drill Head; Shifting The Mill Drill Head - Optimum BF20 V Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y
4.12

Swivelling the mill drill head

The mill drill head may be swivelled to the
Clamping screws
right and to the left. Two clamping screws
need to be loosened.
Fig.4-8: Clamping screws
CAUTION!
If the screws are completely unfastened, the milling head might fall down.
When tilting the working head, only unfasten the screws as far as necessary to be able
to perform the settings. After having set the tilt angle, retighten the clamping screws.

4.12.1 Shifting the mill drill head

The column of the mill drill head can be shifted each to the left or to the right.
Use the option of shifting if you need to swivel the mill drill head to the left or to the right for wor-
king.
US BF20V
Page 32 Original operating instructions Version 3.1.8 dated 2015-1-27