Performance Check - JRC JMA-5912-6 Instruction Manual

8.3

PERFORMANCE CHECK

Make operational check on the radar equipment regularly and if any problem is found, investigate it
immediately. Pay special attention to the high voltage sections in checking and take full care that no
trouble is caused by any error or carelessness in measurement. Take note of the results of checking, which
can be used effectively in the next check work.
Operational check shall be made in accordance with Table 8-1 Function Check List in the order as specified
in it.
Equipment
Transmitter-receiver
Tuning LED of Receiver
Unit
Video and echoes on the screen
Sensitivity
LCD brilliance can be controlled correctly
Various markers
Various numerical indications
Lighting
Memory
Communications Lines
Display Unit
Power Supply, Backup Battery
Monitor
Operation Unit
System Alarm Log Display
System Information Display
Magnetron current
Target Tracking
Signals from the Scanner Unit
Scanner Unit
Performance Monitor
Table 8-1 Check List
Item to be checked
8-6

8.3 Performance Check

Criteria
The LED is lighting
during operation
Can be correctly
controlled
See section 8.3.1 [I]-[1].
See section 8.3.1 [I]-[3].
See section 8.3.1 [I]-[4].
See section 8.3.1 [II].
See section 8.3.1 [III].
See section 8.3.1 [V].
See section 8.3.1 [VI].
See section 8.3.1 [VII].
See section 5.2.7.
See section 8.3.1 [I]-[2].
See section 8.3.1 [IV].
Remarks
48NM
range
8