Settings At Installation; How To Open The Serviceman Menu - JRC JMA-5912-6 Instruction Manual

7.1

SETTINGS AT INSTALLATION

This section describes the electrical adjustment procedures to be performed by service engineers during
system installation.
The bearing adjustment value is saved to non-volatile memory in the scanner. Other settings are saviedto
non-volatile memory in the radar process unit.
Any adjustments must be made by specialized service
personnel.
Incorrect settings may result in unstable operation.
Do not make any adjustments during navigation. Failure to
comply may result in adverse effects on the radar function
which may lead to accidents or equipment failure.
7.1.1

How to Open the Serviceman Menu

Procedures 1. Press the [RADAR Menu] key for 2
2. Press [0] key.
3. Put the cursor on the ENT
CAUTION
seconds.
The Code Input menu will appear.
and press the [ENT] key.
The Serviceman Menu will appear.
button,
7-1