tecan NanoQuant Plate Quick Manual page 10

16. As the measurement is performed an Excel sheet opens automatically
in the background. All measurement results (including the
automatically calculated nucleic acid concentration, the 260/280 ratio,
and for Labeling Efficiency measurements, the dye concentration) are
concisely displayed in a matrix (analogous to the plate layout). The
OD values of each sample at all relevant wavelengths are also
displayed.
Figure 3: Overview of Excel result sheet
17. Once the measurement procedure is finished, the plate is moved out
automatically. A pop-up message appears, asking if the user wishes
to perform another measurement.
•
•
10 Quick Guide NanoQuant Plate
If additional (identical) measurements are to be performed, wipe
off any sample residues from the previous measurement and
apply new samples. Click
If no further measurement is to be performed, click No. An extra
sheet appears in the Excel workbook summarizing the results of
all previous measurements.
Yes
to start the measurement.
TM
No.30035094 Rev No. 1.4 2013-06