5. INSPECTION AND CHECK PROCEDURES
5.1 Preparations for inspections
5.1.1 AC Line Setting
(1) Set the AC Line cycle setting of the GL820 to the same cycle as that of your AC line (See Section 4.2).
5.1.2 Sampling setting
(1) Set the Sampling setting of the GL820 to at least 1 sec or longer.
5.1.3 Copy the condition settings file
Condition settings files :GL820ConditionVolt.CND
(1) Copy the condition settings file to a USB memory device from the computer.
GL820-UM-251-9370
:GL820ConditionTC.CND
:GL820ConditionPT.CND
5. INSPECTION AND CHECK PROCEDURES
← Condition settings for Voltage accuracy
← Condition settings for T and K range accuracy
← Condition settings for PT range accuracy
5-1