Verify Guest Access (Optional) - HP MSM720 Installation Manual

Review the settings before you select Apply to save and activate the new configuration
on the controller. Alternatively, select Back to go to the previous workflow page or select
Cancel to discard your workflow settings and exit the workflow.
d. After applying your changes, a confirmation page appears showing the menu paths to
each configuration page associated with the Configure initial controller settings workflow.
For example:
e. If desired, select a page link to make additional configuration changes and then select
Automated workflows above the Network Tree to return to this page.
f. Select Done.
g. If desired, start one of these other workflows:
h. Select any menu to exit the workflow.

Verify guest access (optional)

Although optional it is recommended that you perform a simple verification of the guest access
interface using a local guest account. This verification uses the Create a wireless network for guests
workflow. Sample values are used. Substitute your own values if desired.
18 Controller initial configuration
Create a wireless network for employees: This workflow helps you create a new
wireless network to provide wireless access for employees. It lets you define how
employee traffic will be distributed onto your wired infrastructure and configure
wireless security settings to safeguard network traffic.
Create a wireless network for guests: This workflow helps you create a new wireless
network to provide wireless access for guests. It lets you define how guests will be
authenticated (using a RADIUS server or the local user accounts feature on the
controller) and how guests will receive an IP address.
Caution: When using teaming, you must not use this workflow. Instead, you must
manually configure guest access as described in the MSM7xx Controllers Configuration
Guide under "Guest access and teaming".