Upgrading And Provisioning; Upgrading Firmware; Upgrading Via Web Gui - Grandstream Networks GWN7000 User Manual

UPGRADING FIRMWARE

The GWN7000 can be upgraded to a new firmware version remotely or locally. This section describes how
to upgrade your GWN7000 via network or local upload.

UPGRADING VIA WEB GUI

The GWN7000 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the
TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP, HTTP or
HTTPS; the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com/BETA
192.168.5.87
The upgrading configuration can be accessed via Web GUI->Router->Maintenance.
Upgrade Via
Firmware Server
Check Update on Boot
Automatic Upgrade check interval(m)
Upgrade Now
UPGRADING VIA CLI
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
Please do not interrupt or power cycle the GWN7000 during upgrading process.

UPGRADING AND PROVISIONING

Table 15: Network Upgrade Configuration
Allow users to choose the firmware upgrade method: TFTP, HTTP
or HTTPS.
Define the server path for the firmware server.
If checked, the device will check if there is a firmware from the
configured firmware server at boot.
Set the value for automatic upgrade check in minutes.
Click on
device will reboot after downloading the firmware.
GWN7000 Enterprise Router & Access Point Manager
User Manual
button to begin the upgrade. Note that the
P a g e | 39