Siemens SIMATIC ET 200SP Manual page 49

Parameters
Invert direction (counter
inputs)
1
Reaction to signal N
1
Sensor type
Set output
Substitute value for DQ
1
Count direction of the
DQ function
1
Pulse duration [ms/10]
1
Set function of DI
Select level for DI
1
Technology Module TM Count 1x24V (6ES7138-6AA00-0BA0)
Manual, 02/2017, A5E33002339-AB
Value range
Deactivated
•
Activated
•
No reaction to signal N
•
Synchronization at signal N
•
Sourcing output
•
Sinking output
•
Push-pull (sinking and sourcing
•
output)
Use by user program
•
Between comparison value and
•
high counting limit
Between comparison value and
•
low counter limit
At comparison value for a pulse
•
duration
After set command from CPU
•
until comparison value
Between comparison value 0
•
and 1
0
•
1
•
Forward
•
Backward
•
In both directions
•
0...65535
Gate start/stop (level-triggered)
•
Gate start (edge-triggered)
•
Gate stop (edge-triggered)
•
Synchronization
•
Enable synchronization at sig-
•
nal N
Digital input without function
•
Active with high level
•
Active with low level
•
Default setting Re-
configura-
tion in
RUN
Deactivated Yes
No reaction to Yes
signal N
Sourcing out- Yes
put
DQ0, DQ1: Yes
Digital output
without function
DQ0, DQ1: 0 Yes
In both direc- Yes
tions
5000 (corre- Yes
sponds to
0.5 s)
Digital input Yes
without function
Active with high Yes
level
Configuring/address space
4.4 Parameters
Effective range with
configuring software
HSP for HSP for
STEP 7 STEP 7;
(TIA Portal) GSD file
Channel Channel
Channel Channel
Channel Channel
Channel Channel
Channel Channel
Channel Channel
Channel Channel
Channel Channel
Channel Channel
49