Siemens SIMATIC ET 200SP Manual page 42

Configuring/address space
4.4 Parameters
Parameters
Sensor type
Signal selection for refer-
ence mark 0
Steps per revolution
Reference speed [10 rpm] 600...21000000
-2
Potential group
42
Value range
Sourcing output
•
Sinking output
•
Push-pull (sinking and sourcing
•
output)
DI0
•
Signal N of incremental encoder
•
1...65535
Use the potential group of the left
•
module (dark BaseUnit)
Enable new potential group (light
•
BaseUnit)
Default setting
configura-
tion in RUN
Sourcing output Yes
DI0 Yes
1 Yes
300000 (corre- Yes
sponds to
3000 rpm)
Use the potential No
group of the left
module (dark
BaseUnit)
Technology Module TM Count 1x24V (6ES7138-6AA00-0BA0)
Manual, 02/2017, A5E33002339-AB
Re- Effective range
with
configuring soft-
ware
HSP for STEP 7
(TIA Portal)
Channel
Channel
Channel
Channel
Module