Siemens SIMATIC ET 200SP Manual page 51

Hide thumbs Also See for SIMATIC ET 200SP:
Table of Contents

Advertisement

Parameters
Hysteresis
1
Potential group
Due to the limited number of parameters at a maximum of 244 bytes per ET 200SP station with a PROFIBUS GSD
1
configuration, the possible parameter settings are restricted. The parameter is downloaded to the module with the de-
fault setting. If your PROFIBUS master supports the "Read/write data record" function, you can set these parameters
using data record 128.
When a GSD file is used, this diagnostic interrupt is activated via the "Enable additional diagnostic interrupts" parameter
2
and cannot be set separately.
Technology Module TM Count 1x24V (6ES7138-6AA00-0BA0)
Manual, 02/2017, A5E33002339-AB
Value range
0...255
Use the potential group of the
left module (dark BaseUnit)
Enable new potential group (light
BaseUnit)
Default setting
Re-
configura-
tion in
RUN
0
Yes
Use the poten-
No
tial group of the
left module
(dark BaseUnit)
Configuring/address space
4.4 Parameters
Effective range with
configuring software
HSP for
HSP for
STEP 7
STEP 7;
(TIA Portal)
GSD file
Channel
Channel
Module
Module
51

Advertisement

Table of Contents
loading

Table of Contents