Siemens SIMATIC ET 200SP Manual page 29

Applications Components required
Distributed operation
•
with an S7-1500
CPU
•
•
Distributed operation
•
with a
CPU S7-300/400 or
S7-1200
•
•
Distributed operation
•
in a third-party sys-
tem
•
•
Technology Module TM Count 1x24V (6ES7138-6AA00-0BA0)
Manual, 02/2017, A5E33002339-AB
Configuration software
STEP 7 (TIA Portal):
S7-1500 automation
system
Operating with technology object
"Counting and measurement"
ET 200SP distributed
I/O system
•
TM Count 1x24V
•
STEP 7 (TIA Portal):
Position input for technology object
"Motion Control"
•
•
STEP 7 (TIA Portal):
Manual operation (without technology
object)
•
STEP 7 (TIA Portal):
Fast Mode
•
STEP 7 (TIA Portal):
S7-300/400 or
S7-1200 automation
Device configuration and parameter
setting with hardware configuration
system
STEP 7:
ET 200SP distributed
I/O system
Device configuration and parameter
setting
TM Count 1x24V
Third-party configuration software:
Third-party automation
system Device configuration and parameter
settings with GSD file
ET 200SP distributed
I/O system
TM Count 1x24V
Device configuration with hardware
configuration
Parameter setting with
High_Speed_Counter technology
object
Device configuration with hardware
configuration
Parameter setting with axis tech-
nology object
Device configuration and parameter
setting with hardware configuration
Device configuration and parameter
setting with hardware configuration
Configuring/address space
4.1 Configuring
In the user program
High_Speed_Counter in-
struction
Motion Control instructions
Direct access to the control
and feedback interface in the
I/O data
Direct access to the feed-
back interface (Page 56) in
the I/O data
Direct access to the control
and feedback interface
(Page 52) in the I/O data
29