Siemens SIMATIC ET 200SP Manual page 13

The module supports the following functions:
Table 2- 1
Counting/measuring
Operating with technology ob-
ject "Counting and measure-
ment"
Position input for technology
object "Motion Control"
Centralized operation on
CPU 151xSP
Fast Mode
Accessories
The following accessories can be used with the module and are not included in the scope of
delivery:
● Labeling strip
● Color identification labels
● Reference identification labels
● Shield connector
A BaseUnit of the A0 type is required to operate the technology module. For an overview of
the BaseUnits that you can use with the technology module, please refer to the product
information on the documentation for the ET 200SP Distributed I/O System
(http://support.automation.siemens.com/WW/view/en/73021864).
For detailed information on the installation procedure, refer to the ET 200SP Distributed I/O
System (http://support.automation.siemens.com/WW/view/en/58649293) system manual.
Technology Module TM Count 1x24V (6ES7138-6AA00-0BA0)
Manual, 02/2017, A5E33002339-AB
Version dependencies of module functions
Function Firmware
version of
the module
V1.0 or
higher
V1.0 or
higher
V1.0 or
higher
V1.1 or
higher
V1.2 or
higher
Configurable as of
STEP 7 STEP 7
(TIA Portal)
V13 V5.5 SP4
or V5.5
SP3 with
HSP0240
V1.0
V13 —
V13 —
V13 SP1 —
V14 SP1 V5.6
or V14 with or V5.5
HSP0199 SP4 with
HSP0240
V5.0
Product overview
2.1 Properties
GSD
PROFINET PROFIBUS
IO DP
X X
— —
— —
— —
X X
13