Siemens SIMATIC ET 200SP Manual page 35

Parameter setting via ...
Hardware configuration using GSD
file for distributed operation on the
PROFINET IO
Hardware configuration using GSD
file for distributed operation on the
PROFIBUS DP
You will find the parameters in the following sections according to operating mode.
Technology Module TM Count 1x24V (6ES7138-6AA00-0BA0)
Manual, 02/2017, A5E33002339-AB
Basic procedure
1. Install the latest PROFINET GSD file.
You will then find the module in the hardware catalog under "Additional Field
Devices > PROFINET IO > I/O".
2. Set the parameters in the hardware configuration.
3. Download the parameter assignment to the module.
1. Install the latest PROFIBUS GSD file.
You will then find the module in the hardware catalog under "Additional Field
Devices > PROFINET IO > I/O".
2. Set the parameters in the hardware configuration.
The parameters marked with
PROFIBUS GSD file.
3. Download the parameter assignment to the module.
This will download the parameters marked with
default setting. You can change these parameters in the user program using
data record 128 (Page 73).
Configuring/address space
in the following tables cannot be set in the
1
in the following tables with the
1
4.4 Parameters
35